[Qemu-devel] Re: WINE with QEMU on PPC

[Sander Nagtegaal]

Just tested something..........it gives the same error with non-existed 
directories. It does not give the error when not using the -L option but then 
it can't find some libraries.........

Hope you know what to do........

Thanks , Sander

Op maandag 7 juni 2004 23:32, schreef u:
> With the -L option error returns.
>
> address@hidden ****]$ qemu-i386 -L /home/*****/Emulation
> /home/******/Emulation/usr/bin/wineserver
> qemu: uncaught target signal 11 (Segmentation fault) - exiting
>
> So it still doesn't work sadly...........I think I'm very close. Would a
> CVS qemu help maybe?
>
> Op maandag 7 juni 2004 22:07, schreef u:
> > It looks like you forgot the -L option.
> >
> > Sander Nagtegaal <address@hidden> said:
> > > address@hidden Emulation]$ qemu-i386
> > > /home/azrael/Emulation/usr/bin/wineserver
> > > /home/azrael/Emulation/usr/bin/wineserver: /lib/libc.so.6: version
> > > `GLIBC_2.2' not found (required by
> > > /home/azrael/Emulation/usr/bin/wineserver)
> > > /home/azrael/Emulation/usr/bin/wineserver: /lib/libc.so.6: version
> > > `GLIBC_2.3' not found (required by
> > > /home/azrael/Emulation/usr/bin/wineserver)
> > > /home/azrael/Emulation/usr/bin/wineserver: /lib/libc.so.6: version
> > > `GLIBC_2.2' not found (required by
> > > /home/azrael/Emulation/usr/lib/libwine.so.1)
> > > /home/azrael/Emulation/usr/bin/wineserver: /lib/libc.so.6: version
> > > `GLIBC_2.3' not found (required by
> > > /home/azrael/Emulation/usr/lib/libwine_unicode.so.1)
> > >
> > > I'm a step further. The 11 error was just that I didn't correctly put
> > > the LD path with declare -x
> > > Doing that solved my problem.
> > > But now wineserver only can't find 4 pieces. Where to get them? I
> > > installed every rpm you said and everything is found except for those
> > > 4.........
> > >
> > > Op maandag 7 juni 2004 15:55, schreef u:
> > > > On Mon, 2004-06-07 at 13:36, Sander Nagtegaal wrote:
> > > > > -Put them in the target platform directory (mine is
> > > > > /home/ARCHS/rh_x86) -Install the rpm's using rpm2cpio and cpio:
> > > > > e.g.
> > > > > $ rpm2cpio ash-0.3.8-8.i386.rpm | cpio -idv
> > > > >
> > > > > Just a small question. Can I give the target platform directory any
> > > > > name I want? And then just change the dir? Or does it have to be a
> > > > > /ARCHS/rh_x86 type of directory?
> > > >
> > > > It can be any name you like. I just mentioned the name I gave because
> > > > it also occurs in the config file.
> > > >
> > > > On Mon, 2004-06-07 at 14:35, Sander Nagtegaal wrote:
> > > > > groff: error while loading shared libraries:
> > > > > /home/azrael/Emulation/usr/lib/libstdc++.so.5: ELF file data
> > > > > encoding not big-endian
> > > > >
> > > > > Another thing is that when I now run a "man **** " command it gives
> > > > > errors. All my man pages are not working anymore.........maybe some
> > > > > declare path is wrong?
> > > >
> > > > I'm afraid that's normal: your LD_LIBRARY_PATH now points to the x86
> > > > libraries. If you just open a new terminal window, and run "man"
> > > > there, that should be OK.
> > > > To avoid this kind of problem, I put my qemu-specific commands in
> > > > shell scripts. The "declare" statements are only valid within the
> > > > enviroment of the script, not outside it.
> > > >
> > > > On Mon, 2004-06-07 at 14:26, Sander Nagtegaal wrote:
> > > > > address@hidden Emulation]$ qemu-i386 -L /home/azrael/Emulation
> > > > > /home/azrael/Emulation/usr/bin/wineserver
> > > > > qemu: uncaught target signal 11 (Segmentation fault) - exiting
> > > > >
> > > > > That's what I got trying to run winserver. What could be the
> > > > > problem?
> > > >
> > > > The wineserver error is a different issue. What qemu are you using? I
> > > > am now using qemu-0.5.5, and wine-20040505; before, I used qemu-0.5.3
> > > > and wine-20040309.
> > > > I have glibc-2.3.3 and I use gcc-3.3.2 for building.
> > > > But I'm just a user, segfaults in qemu is something for the real
> > > > qemu-guru's.
> > > >
> > > > Cheers,
> > > >
> > > > Wim
> > > >
> > > > > Op maandag 7 juni 2004 12:27, schreef u:
> > > > > > In attachment my wine config file. Save it as ~/.wine/config
> > > > > > and edit the "Path" entries under the [Drive ...] entries a bit
> > > > > > so that all paths point to meaningful directories:
> > > > > >
> > > > > > [Drive C]
> > > > > > "Path"="/home/ARCHS/rh_x86/usr/share/wine-c"
> > > > > > "Type" = "hd"
> > > > > > "Label" = "MS-DOS"
> > > > > > "Filesystem" = "win95"
> > > > > >
> > > > > >   [Drive D] "Path" = "/mnt/cdrom"
> > > > > > "Type" = "cdrom"
> > > > > > "Label" = "CD-Rom"
> > > > > > "Filesystem" = "win95"
> > > > > > ; make sure that device is correct and has proper permissions !
> > > > > > "Device" = "/dev/cdrom"
> > > > > >
> > > > > >     [Drive E] "Path" = "/tmp"
> > > > > > "Type" = "hd"
> > > > > > "Label" = "Tmp Drive"
> > > > > > "Filesystem" = "win95"
> > > > > >
> > > > > >     [Drive F] "Path" = "/home/wim"
> > > > > > "Type" = "network"
> > > > > > "Label" = "Home"
> > > > > > "Filesystem" = "win95"
> > > > > >
> > > > > >     [Drive G] "Path" = "/home/ARCHS/rh_x86"
> > > > > > "Type" = "hd"
> > > > > > "Label" = "MS-DOS"
> > > > > > "Filesystem" = "win95"
> > > > > >
> > > > > > On Mon, 2004-06-07 at 10:53, Sander Nagtegaal wrote:
> > > > > > > Op maandag 7 juni 2004 10:29, schreef u:
> > > > > > > > -I assume you know how to set up wine (I mean adapting the
> > > > > > > > ~/.wine/config file). My qemu-wine home directory is
> > > > > > > > usr/share/wine-c in the target platform directory. If you
> > > > > > > > like I can mail my .wine/config file.
> > > > > > >
> > > > > > > No......I do not know how to set up wine..That was my next
> > > > > > > problem after I managed to let qemu run the "ls" file. Could
> > > > > > > you mail the config or email me how to set it up? Thanks alot!
> > > > > > > You're a great help. I'm going to try it!