RE: [Qemu-devel] Sparc guest - SCSI

[Nigel Horne]

> Am 03.08.2007 um 12:42 schrieb Nigel Horne:
>
> > Andreas Färber wrote:
> >> Am 03.08.2007 um 10:45 schrieb Nigel Horne:
> >>> Guest: Linux/sparc
> >>> Host: Linux/x86
> >>>
> >>>> From time to time I am getting SCSI errors from the guest using the
> >>> latest CVS:
> >>>
> >>> scsi : aborting command due to timeout : pid 50803, scsi0,
> >>> channel 0, id 0, lun 0 0x2a 00 00 3d be 84 00 00 08 00 esp0:
> >>> Aborting command
> >>> esp0: dumping state
> >>> esp0: dma -- cond_reg<a4000211> addr<f292b000>
> >>> esp0: SW [sreg<00> sstep<04> ireg<18>]
> >>> esp0: HW reread [sreg<03> sstep<00> ireg<10>]
> >>> esp0: current command [tgt<00> lun<00> pphase<DATAOUT>
> >>> cphase<DATAOUT>]
> >>> esp0: disconnected SCSI host 0 abort (pid 50803) timed out -
> >>> resetting
> >>> SCSI bus is being reset for host 0 channel 0.
> >>> esp0: Resetting scsi bus
> >>> esp0: SCSI bus reset interrupt
> >>>
> >>> As far as I can tell the guest recovers fine, but it may be worth
> >>> investigating.
> >> I reported similar errors recently (OS X ppc host) - for me it
> >> panics afterwards and does not recover fine. I got the impression
> >> that it happens later if I disable the lance NIC.
> >
> > I have the lance NIC enabled in the guest.
>
> So what? I usually have it enabled, too. :)
>

No need to be so rude/agressive, I just thought I'd add the information in
case
some one found it helpful.