[Qemu-devel] [PATCH 24/32] target-arm: Convert cp15 crn=1 registers

[Peter Maydell]

Convert the cp15 crn=1 registers to the new scheme.

Signed-off-by: Peter Maydell <address@hidden>
---
 target-arm/cpu-qom.h |    1 +
 target-arm/cpu.c     |    7 ++-
 target-arm/helper.c  |  129 +++++++++++++++++++++-----------------------------
 3 files changed, 61 insertions(+), 76 deletions(-)

diff --git a/target-arm/cpu-qom.h b/target-arm/cpu-qom.h
index f8f1e7a..75109fa 100644
--- a/target-arm/cpu-qom.h
+++ b/target-arm/cpu-qom.h
@@ -95,6 +95,7 @@ typedef struct ARMCPU {
      */
     uint32_t ccsidr[16];
     uint32_t reset_cbar;
+    uint32_t reset_auxcr;
 } ARMCPU;
 
 static inline ARMCPU *arm_env_get_cpu(CPUARMState *env)
diff --git a/target-arm/cpu.c b/target-arm/cpu.c
index 31c9820..0141296 100644
--- a/target-arm/cpu.c
+++ b/target-arm/cpu.c
@@ -77,7 +77,6 @@ static void arm_cpu_reset(CPUState *s)
     env->vfp.xregs[ARM_VFP_MVFR0] = cpu->mvfr0;
     env->vfp.xregs[ARM_VFP_MVFR1] = cpu->mvfr1;
     env->cp15.c0_cachetype = cpu->ctr;
-    env->cp15.c1_sys = cpu->reset_sctlr;
     env->cp15.c0_c1[0] = cpu->id_pfr0;
     env->cp15.c0_c1[1] = cpu->id_pfr1;
     env->cp15.c0_c1[2] = cpu->id_dfr0;
@@ -246,6 +245,7 @@ static void arm1026_initfn(Object *obj)
     cpu->reset_fpsid = 0x410110a0;
     cpu->ctr = 0x1dd20d2;
     cpu->reset_sctlr = 0x00090078;
+    cpu->reset_auxcr = 1;
     {
         /* The 1026 had an IFAR at c6,c0,0,1 rather than the ARMv6 c6,c0,0,2 */
         ARMCPRegInfo ifar = {
@@ -291,6 +291,7 @@ static void arm1136_r2_initfn(Object *obj)
     cpu->id_isar2 = 0x11231111;
     cpu->id_isar3 = 0x01102131;
     cpu->id_isar4 = 0x141;
+    cpu->reset_auxcr = 7;
 }
 
 static void arm1136_initfn(Object *obj)
@@ -320,6 +321,7 @@ static void arm1136_initfn(Object *obj)
     cpu->id_isar2 = 0x11231111;
     cpu->id_isar3 = 0x01102131;
     cpu->id_isar4 = 0x141;
+    cpu->reset_auxcr = 7;
 }
 
 static void arm1176_initfn(Object *obj)
@@ -348,6 +350,7 @@ static void arm1176_initfn(Object *obj)
     cpu->id_isar2 = 0x11231121;
     cpu->id_isar3 = 0x01102131;
     cpu->id_isar4 = 0x01141;
+    cpu->reset_auxcr = 7;
 }
 
 static void arm11mpcore_initfn(Object *obj)
@@ -374,6 +377,7 @@ static void arm11mpcore_initfn(Object *obj)
     cpu->id_isar2 = 0x11221011;
     cpu->id_isar3 = 0x01102131;
     cpu->id_isar4 = 0x141;
+    cpu->reset_auxcr = 1;
 }
 
 static void cortex_m3_initfn(Object *obj)
@@ -422,6 +426,7 @@ static void cortex_a8_initfn(Object *obj)
     cpu->ccsidr[0] = 0xe007e01a; /* 16k L1 dcache. */
     cpu->ccsidr[1] = 0x2007e01a; /* 16k L1 icache. */
     cpu->ccsidr[2] = 0xf0000000; /* No L2 icache. */
+    cpu->reset_auxcr = 2;
     define_arm_cp_regs(&cpu->env, cortexa8_cp_reginfo);
 }
 
diff --git a/target-arm/helper.c b/target-arm/helper.c
index b00410d..5048ac6 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -200,6 +200,16 @@ static const ARMCPRegInfo not_v7_cp_reginfo[] = {
     REGINFO_SENTINEL
 };
 
+static int cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t 
value)
+{
+    if (env->cp15.c1_coproc != value) {
+        env->cp15.c1_coproc = value;
+        /* ??? Is this safe when called from within a TB?  */
+        tb_flush(env);
+    }
+    return 0;
+}
+
 static const ARMCPRegInfo v6_cp_reginfo[] = {
     /* prefetch by MVA in v6, NOP in v7 */
     { .name = "MVA_prefetch",
@@ -219,6 +229,9 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
      */
     { .name = "WFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1,
       .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, },
+    { .name = "CPACR", .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2,
+      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_coproc),
+      .resetvalue = 0, .writefn = cpacr_write },
     REGINFO_SENTINEL
 };
 
@@ -380,6 +393,9 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten),
       .resetvalue = 0,
       .writefn = pmintenclr_write },
+    { .name = "SCR", .cp = 15, .crn = 1, .crm = 1, .opc1 = 0, .opc2 = 0,
+      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_scr),
+      .resetvalue = 0, },
     REGINFO_SENTINEL
 };
 
@@ -741,6 +757,10 @@ static const ARMCPRegInfo xscale_cp_reginfo[] = {
       .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0, .access = PL1_RW,
       .fieldoffset = offsetof(CPUARMState, cp15.c15_cpar), .resetvalue = 0,
       .writefn = xscale_cpar_write, },
+    { .name = "XSCALE_AUXCR",
+      .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1, .access = PL1_RW,
+      .fieldoffset = offsetof(CPUARMState, cp15.c1_xscaleauxcr),
+      .resetvalue = 0, },
     REGINFO_SENTINEL
 };
 
@@ -789,6 +809,15 @@ static const ARMCPRegInfo strongarm_cp_reginfo[] = {
     REGINFO_SENTINEL
 };
 
+static int sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t 
value)
+{
+    env->cp15.c1_sys = value;
+    /* ??? Lots of these bits are not implemented.  */
+    /* This may enable/disable the MMU, so do a TLB flush.  */
+    tlb_flush(env, 1);
+    return 0;
+}
+
 void register_cp_regs_for_features(ARMCPU *cpu)
 {
     /* Register all the coprocessor registers based on feature bits */
@@ -863,6 +892,31 @@ void register_cp_regs_for_features(ARMCPU *cpu)
     if (arm_feature(env, ARM_FEATURE_DUMMY_C15_REGS)) {
         define_arm_cp_regs(env, dummy_c15_cp_reginfo);
     }
+    if (arm_feature(env, ARM_FEATURE_AUXCR)) {
+        ARMCPRegInfo auxcr = {
+            .name = "AUXCR", .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 
1,
+            .access = PL1_RW, .type = ARM_CP_CONST,
+            .resetvalue = cpu->reset_auxcr
+        };
+        define_one_arm_cp_reg(env, &auxcr);
+    }
+
+    /* Generic registers whose values depend on the implementation */
+    {
+        ARMCPRegInfo sctlr = {
+            .name = "SCTLR", .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 
0,
+            .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, 
cp15.c1_sys),
+            .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr
+        };
+        if (arm_feature(env, ARM_FEATURE_XSCALE)) {
+            /* Normally we would always end the TB on an SCTLR write, but Linux
+             * arch/arm/mach-pxa/sleep.S expects two instructions following
+             * an MMU enable to execute from cache.  Imitate this behaviour.
+             */
+            sctlr.type |= ARM_CP_SUPPRESS_TB_END;
+        }
+        define_one_arm_cp_reg(env, &sctlr);
+    }
 }
 
 CPUARMState *cpu_arm_init(const char *cpu_model)
@@ -1935,42 +1989,6 @@ void HELPER(set_cp15)(CPUARMState *env, uint32_t insn, 
uint32_t val)
             break;
         }
         goto bad_reg;
-    case 1: /* System configuration.  */
-        if (arm_feature(env, ARM_FEATURE_V7)
-                && op1 == 0 && crm == 1 && op2 == 0) {
-            env->cp15.c1_scr = val;
-            break;
-        }
-        if (arm_feature(env, ARM_FEATURE_OMAPCP))
-            op2 = 0;
-        switch (op2) {
-        case 0:
-            if (!arm_feature(env, ARM_FEATURE_XSCALE) || crm == 0)
-                env->cp15.c1_sys = val;
-            /* ??? Lots of these bits are not implemented.  */
-            /* This may enable/disable the MMU, so do a TLB flush.  */
-            tlb_flush(env, 1);
-            break;
-        case 1: /* Auxiliary control register.  */
-            if (arm_feature(env, ARM_FEATURE_XSCALE)) {
-                env->cp15.c1_xscaleauxcr = val;
-                break;
-            }
-            /* Not implemented.  */
-            break;
-        case 2:
-            if (arm_feature(env, ARM_FEATURE_XSCALE))
-                goto bad_reg;
-            if (env->cp15.c1_coproc != val) {
-                env->cp15.c1_coproc = val;
-                /* ??? Is this safe when called from within a TB?  */
-                tb_flush(env);
-            }
-            break;
-        default:
-            goto bad_reg;
-        }
-        break;
     case 4: /* Reserved.  */
         goto bad_reg;
     case 12: /* Reserved.  */
@@ -2071,45 +2089,6 @@ uint32_t HELPER(get_cp15)(CPUARMState *env, uint32_t 
insn)
         default:
             goto bad_reg;
         }
-    case 1: /* System configuration.  */
-        if (arm_feature(env, ARM_FEATURE_V7)
-            && op1 == 0 && crm == 1 && op2 == 0) {
-            return env->cp15.c1_scr;
-        }
-        if (arm_feature(env, ARM_FEATURE_OMAPCP))
-            op2 = 0;
-        switch (op2) {
-        case 0: /* Control register.  */
-            return env->cp15.c1_sys;
-        case 1: /* Auxiliary control register.  */
-            if (arm_feature(env, ARM_FEATURE_XSCALE))
-                return env->cp15.c1_xscaleauxcr;
-            if (!arm_feature(env, ARM_FEATURE_AUXCR))
-                goto bad_reg;
-            switch (ARM_CPUID(env)) {
-            case ARM_CPUID_ARM1026:
-                return 1;
-            case ARM_CPUID_ARM1136:
-            case ARM_CPUID_ARM1136_R2:
-            case ARM_CPUID_ARM1176:
-                return 7;
-            case ARM_CPUID_ARM11MPCORE:
-                return 1;
-            case ARM_CPUID_CORTEXA8:
-                return 2;
-            case ARM_CPUID_CORTEXA9:
-            case ARM_CPUID_CORTEXA15:
-                return 0;
-            default:
-                goto bad_reg;
-            }
-        case 2: /* Coprocessor access register.  */
-            if (arm_feature(env, ARM_FEATURE_XSCALE))
-                goto bad_reg;
-            return env->cp15.c1_coproc;
-        default:
-            goto bad_reg;
-        }
     case 4: /* Reserved.  */
         goto bad_reg;
     case 11: /* TCM DMA control.  */
-- 
1.7.1