Re: [Simulavr-devel] SerialRX and feedback example

[address@hidden]

On Tue Apr  7 16:23 , Joel Sherrill  sent:
>By inserting debug prints, I have confirmed that
>the hwuart is shifting the correct data out the
>TXD pin.  The TXD pin is connected to the RX pin
>of a SerialRX instance.  All data sampled at the
>RX pin is 0 (BAD).  Thus all data in the feedback.tcl
>display is 0.

>From the description, the pins are not connected.
Is the connection done with a Netlist?
If so, perhaps its methods deserve debugging statements.

>I don't see anything wrong with the baud rate calculation.
>The C code thinks it is 9600, the SerialRX instance is
>told 9600 baud.

If one pin isn't even noticing the other,
these little details don't matter much.

>The CPU frequency (4000000) is set in one place in the
>Makefile.am and passed to both the simulator run and the
>build.

Is the parity the same?

--
Michael Hennebry
address@hidden
"War is only a hobby."
---- Msg sent via CableONE.net MyMail - http://www.cableone.net