Re: [Texmacs-dev] Postscript image too big? - help

[Joris van der Hoeven]

On Fri, Sep 23, 2005 at 05:39:10PM +0200, Alvaro Tejero Cantero wrote:
> > If you are in a hurry, I recommend to convert your image into one
> > of a slightly lower resolution, if possible.
> 
> I am unlucky, the structures appearing are very fine and I cannot therefore
> escape this order of magnitude in the size of the plot. The only other
> possibility (but it involves a great deal of work) would be to break up the
> image into a mosaic, and place all the bits together inside a TeXmacs figure.

Can you please make the image available on the web. This will allow
me to play around with it and I will try to quickly find a solution.
I might try to see whether I can bypass scheme and remain entirely inside C++.
This should be possible, since we are dealing with postscript graphics,
which require no conversions.

There is still another thing you may try:

        (debug-set! stack 100000000)

in progs/kernel/boot/compat.scm. Please let me know whether this helps.

Best wishes, Joris