Re: smsd dies. no errors no core dump

[Papa San]

I ran 

./configure --enable-debug --enable-rpldebug

I don't run x, don't have the libs installed so no     --enable-xdebug

I recompiled gnokii and smsd

added -g switch to smsd CFLAGS, remove -s from LDFLAGS

It ran for an hour and 15 min . Then it was noticed that the smsd processes were no longer in ´ps´ and it got restarted.

On the edge of the restart in the log I don't see anything interesting.

 
[Received Ack of type 14, seq:  6]
[Sending Ack of type 14, seq: 5]
Message received: 0x14 / 0x000c
01 08 00 37 03 00 00 12 00 00 00 00             |    7           
Received message type 14
Message: SMS Status Received
    The number of messages: 0
    Unread messages: 0
Message sent: 0x14 / 0x0005
00 01 00 36 64                                  |    6d          
[Received Ack of type 14, seq:  7]
[Sending Ack of type 14, seq: 6]
Message received: 0x14 / 0x000c
01 08 00 37 03 00 00 12 00 00 00 00             |    7           
Received message type 14
Message: SMS Status Received
    The number of messages: 0
    Unread messages: 0
[Sending Ack of type 14, seq: 6]
Message received: 0x14 / 0x000c
01 08 00 37 03 00 00 12 00 00 00 00             |    7           
Received message type 14
Message: SMS Status Received
    The number of messages: 0
    Unread messages: 0
 deamon started :  Tue Jul  8 15:15:09 CEST 2003
Trying to load module /usr/local/lib/smsd/libmysql.so
cfg_file_read - open /root/.gnokiirc: No such file or directory
Opened configuration file /etc/gnokiirc
Added new section global
Adding key/value port//dev/ttyS1
Adding key/value model/5110
Adding key/value initlength/default
Adding key/value connection/serial
Adding key/value bindir//usr/local/sbin/
Initializing connection...
phone instance config:
model: 5110
port_device: /dev/ttyS1
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
Serial device: opening device /dev/ttyS1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Message sent: 0x40 / 0x0004
00 01 64 01                                     |   d            
[Received Ack of type 40, seq:  0]
[Sending Ack of type 40, seq: 7]


I ran smsd from /home/gnokii but there were no core files.

I checked /usr/local/sbin but no core files there either.

Anybody  got any clues?

Regards,

Papa

log.zip
Description: Zip archive