Re: [Ltib] qtopia package build failure while building ltib from CVS (Savannah)

[Stuart Hughes]

Hi Rajesh,

I suspect that /bin/sh is linked to 'dash' as its failing 'source' which 
is definitely present in bash.

Either change the default shell to bash, or change the instances of 
source to '. ./xxxx' as indicated in the patch Daniel sent.

Regards, Stuart

address@hidden wrote:
> Hi Stuart,
>
> I am using Ubuntu linux but the shell is "/bin/bash". I wnet ahead and
> applied your patch and after that I am running into a new issue mentioned
> below.
>
> ------------------------------------------------------------------------
> Processing: qtopia
> ====================
> Build path taken because: directory build, build key set, no prebuilt rpm,
>
> rpmbuild --dbpath /home/rmarathe/myltib/ltib/rootfs//var/lib/rpm --target
> arm --define '_unpackaged_files_terminate_build 0' --define '_target_cpu
> arm' --define '__strip strip' --define '_topdir
> /home/rmarathe/myltib/ltib/rpm' --define '_prefix /usr' --define '_tmppath
> /home/rmarathe/myltib/ltib/tmp' --define '_rpmdir
> /home/rmarathe/myltib/ltib/rpm/RPMS'  --define '_mandir /usr/share/man'
> --define '_sysconfdir /etc' --define '_localstatedir /var' -bc
> --short-circuit 
> /home/rmarathe/myltib/ltib/dist/lfs-5.1/qtopia/qtopia.spec
> Building target platforms: arm
> Building for target arm
> Executing(%build): /bin/sh -e /home/rmarathe/myltib/ltib/tmp/rpm-tmp.37505
> + umask 022
> + cd /home/rmarathe/myltib/ltib/rpm/BUILD
> + cd qtopia-free-2.2.0
> + source ./ltibqtopiaconfig
> /home/rmarathe/myltib/ltib/tmp/rpm-tmp.37505: 1: source: not found
> error: Bad exit status from /home/rmarathe/myltib/ltib/tmp/rpm-tmp.37505
> (%build)
>
>
> RPM build errors:
>     Bad exit status from /home/rmarathe/myltib/ltib/tmp/rpm-tmp.37505
> (%build)
> Build time for qtopia: 0 seconds
>
> Failed building qtopia
>
>
> f_buildrpms() returned an error, exiting
> traceback:
>  main:555
>
>
> Started: Mon Aug 24 09:47:56 2009
> Ended:   Mon Aug 24 09:48:00 2009
> Elapsed: 4 seconds
>
> These packages failed to build:
> qtopia
>
> Build Failed
>
> Exiting on error or interrupt
>
> ------------------------------------------------------------------------
> It says "source .." not found as it is looking for a file
> "./ltibqtopiaconfig". But I do see another file by name "configure" in the
> same directory but not the other file.
>
> So, will changing the spec file work here too ?
>
> thanks and regards,
> Rajesh Marathe.
>
>
> > Hi Rajesh,
> >
> > It looks like a shell quoting problem, it doesn't happen with the bash
> > shell I'm using (3.2), are you using Ubuntu/dash (ls /bin/sh or echo
> > $SHELL), maybe it behaves differently.
> >
> > You could change your default shell to bash, or if you prefer you can
> > try this patch (add extra quotes):
> >
> > --- dist/lfs-5.1/qtopia/qtopia.spec     21 Aug 2009 08:02:28 -0000      1.4
> > +++ dist/lfs-5.1/qtopia/qtopia.spec     21 Aug 2009 15:26:34 -0000
> > @@ -90,8 +90,8 @@
> >   esac
> >
> >   # Use toolchain flags when not spoofing
> > -export EXTRA_CFLAGS=$TOOLCHAIN_CFLAGS
> > -export EXTRA_LDFLAGS=$TOOLCHAIN_CFLAGS
> > +export EXTRA_CFLAGS="$TOOLCHAIN_CFLAGS"
> > +export EXTRA_LDFLAGS="$TOOLCHAIN_CFLAGS"
> >
> > I don't have Ubuntu so am not able to fully build-test this.  If this is
> > the problem then there may be other parts that need quotes.
> >
> > Regards, Stuart