[Ltib] Re: Qtopia build on Ubuntu ver 9.04 finally succeeded

[Stuart Hughes]

Hi Daniel,

Thanks for that, I thought you'd meant that you had to reconfigure and 
install other target package.

As you found out there are some (host) build machine dependencies. 
Unfortunately these are hard to track and some of them should not be 
needed (like the Qt stuff which should be included with qtopia).  The 
list I have is:

For Qtopia2:
e2fsprogs-devel, libjpeg/libjpeg-devel, uuid-dev/libuuid,
gettext (msgfmt), and libxtst-dev

For Qtopia4:
libx11-dev
libpng-dev
libjpeg-dev
Libxext-dev
x11proto-xext-dev
qt3-dev-tools-embedded

zlib/zlib-devel
e2fsprogs/e2fsprogs-devel
libjpeg
libpng/libpng-devel
glib2/glib2-devel
libxml2/libxml2-devel

Currently LTIB only tracks the essential host packages needed on first 
install and so these get missed.  Ideally there should be a way of 
dynamically adding additional host dependencies based on target 
packages.  However this isn't a minor change and I don't have free time 
to do this.

Regards, Stuart


address@hidden wrote:
> Hi Stuart,
>
> Here is the complete list of packages that I installed: Zlib1g,
> Zlib1g-dev, Libuuid1, uuid-dev, e2fslibs, e2fslibs-dev, Libjpeg62,
> Libjpeg62-dev, Libpng12-0, Libpng12-dev, Libx11-6, Libx11-dev, libxext6,
> libxext-dev, libxtst-6, libxtst-dev, X11proto-core-dev,
> X11-proto-xext-dev, Qt3-designer and Qt3-dev-tools-embedded.
>
> These packages will in turn get some dependencies installed. This worked
> for me.
>
> The above information was sourced from Freescale document.
>
> regards,
> Rajesh Marathe.
>
>
>
> > Hi Rajesh,
> >
> > Do you recall what X11 packages you needed to install?  maybe these need
> > to be added as dependencies of qtopia.
> >
> > Regards, Stuart
> >
> > address@hidden wrote:
> > > Hi,
> > >
> > > I was able to finally get the build to succeed with latest from CVS. In
> > > fact, I had to install a set of packages including X11 dependencies to
> > > get
> > > the install going.
> > >
> > > regards,
> > > Rajesh Marathe.
> > >
> > >
> > >
> > > > Hi Stuart,
> > > >
> > > > I am building this for imx27ads platform.
> > > >
> > > > I am not doing any specific configuration as I have just started to
> > > > work
> > > > on this kit + ltib. I just select the target platform as imx27 and
> > > > that's
> > > > it as part of configuration. Rest is all default and I assume this
> > > > should
> > > > be okay. I also saw that QT package inclusion is by default and seems
> > > > to
> > > > be a MUST.
> > > >
> > > > I ran the command ./ltib.
> > > >
> > > > I have attached the output file "out3" along with this email.
> > > >
> > > > It seems qtopia tools are not built, so do I have to set something in
> > > > configuration to get this build beforehand ?
> > > >
> > > > regards,
> > > > Rajesh Marathe.
> > > >
> > > >
> > > >
> > > >
> > > > > Hi Rajesh,
> > > > >
> > > > > Which platform are you building? I ran build regressions on imx31ads,
> > > > > mpc5200, mpc8349itx and mpc8548cds which built okay.
> > > > >
> > > > > You've chopped the start of the errors so it's hard to say what the
> > > > > initial trigger was.  As you say maybe it's missing a dependency which
> > > > > I
> > > > > have configured in.
> > > > >
> > > > > Please say: what command did you run? (./ltib or ./ltib -p qtopia),
> > > > > did
> > > > > you reconfigure? etc.
> > > > >
> > > > > Can you send your config/platform/_target_/.config file so I can see
> > > > > your configuration.
> > > > >
> > > > > Regards, Stuart
> > > > >
> > > > > address@hidden wrote:
> > > > > > Hi Stuart,
> > > > > >
> > > > > > I took the latest from CVS (With today's patch from Daniel) and still
> > > > > > I
> > > > > > see
> > > > > > some errors while building Qtopia tools.
> > > > > > The errors are like:
> > > > > > -------------------------------------------------------------------------
> > > > > > rdparty/kernel/qmotifdnd_x11.cpp:825: error: 'cur_window' was not
> > > > > > declared
> > > > > > in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:826: error: 'cm' was not declared
> > > > > > in
> > > > > > this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:829: error: 'False' was not
> > > > > > declared
> > > > > > in
> > > > > > this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:830: error: 'XSendEvent' was not
> > > > > > declared in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:836: error: 'False' was not
> > > > > > declared
> > > > > > in
> > > > > > this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:839: error: 'struct DndData' has no
> > > > > > member named 'time'
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:839: error: 'CurrentTime' was not
> > > > > > declared in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:842: error: 'cur_window' was not
> > > > > > declared in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:843: error: 'cm' was not declared
> > > > > > in
> > > > > > this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:847: error: 'XSendEvent' was not
> > > > > > declared in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:860: error: 'cur_window' was not
> > > > > > declared in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:860: error: 'struct DndData' has no
> > > > > > member named 'src_window'
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:866: error: 'struct DndData' has no
> > > > > > member named 'property'
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:867: error: 'src_targets' was not
> > > > > > declared in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:881: error: 'struct DndData' has no
> > > > > > member named 'property'
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:881: error: 'Dnd_transfer_failure'
> > > > > > was
> > > > > > not declared in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:882: error: 'struct DndData' has no
> > > > > > member named 'property'
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:882: error: 'struct DndData' has no
> > > > > > member named 'time'
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:882: error: 'XConvertSelection' was
> > > > > > not
> > > > > > declared in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:894: error: 'cm' was not declared
> > > > > > in
> > > > > > this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:897: error: 'False' was not
> > > > > > declared
> > > > > > in
> > > > > > this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:898: error: 'XSendEvent' was not
> > > > > > declared in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:901: error: 'Dnd_selection' was not
> > > > > > declared in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:901: error: 'struct DndData' has no
> > > > > > member named 'property'
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:902: error: 'Dnd_selection_time'
> > > > > > was
> > > > > > not
> > > > > > declared in this scope
> > > > > > 3rdparty/kernel/qmotifdnd_x11.cpp:902: error: 'struct DndData' has no
> > > > > > member named 'time'
> > > > > > make[1]: ***
> > > > > > [tmp/release-shared-linux-g++/3rdparty/kernel/qmotifdnd_x11.o] Error
> > > > > > 1
> > > > > > make[1]: Leaving directory
> > > > > > `/home/rmarathe/myltib/cvsltib/ltib/rpm/BUILD/qtopia-free-2.2.0/qt2/src'
> > > > > > *
> > > > > > ---------------------------------------------------------------------------
> > > > > > *
> > > > > > *               ERROR: Building Qtopia Tools has failed.
> > > > > > *
> > > > > >
> > > > > > --------------------------------------------------------------------------
> > > > > >
> > > > > > and more errors follow. It seems the X11 related files are not
> > > > > > installed
> > > > > > in my version of Ubuntu Linux. Any clue ?
> > > > > >
> > > > > > regards,
> > > > > > Rajesh Marathe.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > > Hi Daniel,
> > > > > > >
> > > > > > > I stripped the \r characters and added a brief description to the
> > > > > > > patch
> > > > > > > and uploaded it to the GPP (added a -1 to the filename).  I've
> > > > > > > updated
> > > > > > > the qtopia.spec file and checked into CVS.
> > > > > > >
> > > > > > > Thanks again for the patch.
> > > > > > >
> > > > > > > Regards, Stuart
> > > > > > >
> > > > > > > Stuart Hughes wrote:
> > > > > > > > Hi Daniel,
> > > > > > > >
> > > > > > > > Thanks I'll take a look and apply accordingly to CVS.
> > > > > > > >
> > > > > > > > Regards, Stuart
> > > > > > > >
> > > > > > > > Daniel Widyanto wrote:
> > > > > > > > > Hi Stuart,
> > > > > > > > >
> > > > > > > > > Thanks a lot. Sorry if I cannot help much. The patch was based on
> > > > > > > > > what
> > > > > > > > > we had created to demonstrate our LPC3250 GUI capabilities on
> > > > > > > > > Linux
> > > > > > > > > for a customer.
> > > > > > > > > Another thing that we found was that the latest GLIBC fingerprint
> > > > > > > > > for
> > > > > > > > > open() has changed. Hence it would break the Qtopia compilation.
> > > > > > > > > Also,
> > > > > > > > > there's a qtopia's tool, called pngscale, which suppose to run on
> > > > > > > > > host, but linked to arm library instead.
> > > > > > > > > Attached is the patch to fix those problems. I'm not sure how to
> > > > > > > > > integrate it to LTIB package. Sorry. I should spend time with LTIB
> > > > > > > > > more often =)
> > > > > > > > >
> > > > > > > > > Regards,
> > > > > > > > > -daniel
> > > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: Stuart Hughes [mailto:address@hidden Sent: Tuesday, August
> > > > > > > > > 25,
> > > > > > > > > 2009 4:22 PM
> > > > > > > > > To: Daniel Widyanto
> > > > > > > > > Cc: address@hidden
> > > > > > > > > Subject: Re: [Ltib] qtopia package build failure while building
> > > > > > > > > ltib
> > > > > > > > > from CVS (Savannah)
> > > > > > > > >
> > > > > > > > > Hi Daniel,
> > > > > > > > >
> > > > > > > > > I re-worked and build-tested your patch (imx27) and have checked
> > > > > > > > > it
> > > > > > > > > in
> > > > > > > > > to Savannah CVS.  Let me know if you think it needs any
> > > > > > > > > adjustments.
> > > > > > > > > I've attached the patch/diff so you can see what changed.
> > > > > > > > >
> > > > > > > > > Regards, Stuart
> > > > > > > > _______________________________________________
> > > > > > > > LTIB home page: http://ltib.org
> > > > > > > >
> > > > > > > > Ltib mailing list
> > > > > > > > address@hidden
> > > > > > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > > > > > _______________________________________________
> > > > > > > LTIB home page: http://ltib.org
> > > > > > >
> > > > > > > Ltib mailing list
> > > > > > > address@hidden
> > > > > > > http://lists.nongnu.org/mailman/listinfo/ltib