[PULL 25/29] hw/arm/xilinx_zynq: Add boot-mode property

[Peter Maydell]

From: Sai Pavan Boddu <sai.pavan.boddu@amd.com>

Read boot-mode value as machine property and propagate that to
SLCR.BOOT_MODE register.

Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@amd.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-id: 20240621125906.1300995-3-sai.pavan.boddu@amd.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/xilinx_zynq.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index c79661bbc1b..3c56b9abe1c 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -38,6 +38,7 @@
 #include "qom/object.h"
 #include "exec/tswap.h"
 #include "target/arm/cpu-qom.h"
+#include "qapi/visitor.h"
 
 #define TYPE_ZYNQ_MACHINE MACHINE_TYPE_NAME("xilinx-zynq-a9")
 OBJECT_DECLARE_SIMPLE_TYPE(ZynqMachineState, ZYNQ_MACHINE)
@@ -90,6 +91,7 @@ struct ZynqMachineState {
     MachineState parent;
     Clock *ps_clk;
     ARMCPU *cpu[ZYNQ_MAX_CPUS];
+    uint8_t boot_mode;
 };
 
 static void zynq_write_board_setup(ARMCPU *cpu,
@@ -176,6 +178,27 @@ static inline int zynq_init_spi_flashes(uint32_t 
base_addr, qemu_irq irq,
     return unit;
 }
 
+static void zynq_set_boot_mode(Object *obj, const char *str,
+                                               Error **errp)
+{
+    ZynqMachineState *m = ZYNQ_MACHINE(obj);
+    uint8_t mode = 0;
+
+    if (!strncasecmp(str, "qspi", 4)) {
+        mode = 1;
+    } else if (!strncasecmp(str, "sd", 2)) {
+        mode = 5;
+    } else if (!strncasecmp(str, "nor", 3)) {
+        mode = 2;
+    } else if (!strncasecmp(str, "jtag", 4)) {
+        mode = 0;
+    } else {
+        error_setg(errp, "%s boot mode not supported", str);
+        return;
+    }
+    m->boot_mode = mode;
+}
+
 static void zynq_init(MachineState *machine)
 {
     ZynqMachineState *zynq_machine = ZYNQ_MACHINE(machine);
@@ -241,6 +264,7 @@ static void zynq_init(MachineState *machine)
     /* Create slcr, keep a pointer to connect clocks */
     slcr = qdev_new("xilinx-zynq_slcr");
     qdev_connect_clock_in(slcr, "ps_clk", zynq_machine->ps_clk);
+    qdev_prop_set_uint8(slcr, "boot-mode", zynq_machine->boot_mode);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(slcr), &error_fatal);
     sysbus_mmio_map(SYS_BUS_DEVICE(slcr), 0, 0xF8000000);
 
@@ -373,6 +397,7 @@ static void zynq_machine_class_init(ObjectClass *oc, void 
*data)
         NULL
     };
     MachineClass *mc = MACHINE_CLASS(oc);
+    ObjectProperty *prop;
     mc->desc = "Xilinx Zynq Platform Baseboard for Cortex-A9";
     mc->init = zynq_init;
     mc->max_cpus = ZYNQ_MAX_CPUS;
@@ -380,6 +405,12 @@ static void zynq_machine_class_init(ObjectClass *oc, void 
*data)
     mc->ignore_memory_transaction_failures = true;
     mc->valid_cpu_types = valid_cpu_types;
     mc->default_ram_id = "zynq.ext_ram";
+    prop = object_class_property_add_str(oc, "boot-mode", NULL,
+                                         zynq_set_boot_mode);
+    object_class_property_set_description(oc, "boot-mode",
+                                          "Supported boot modes:"
+                                          " jtag qspi sd nor");
+    object_property_set_default_str(prop, "qspi");
 }
 
 static const TypeInfo zynq_machine_type = {
-- 
2.34.1