Re: [Qemu-riscv] [Qemu-devel] [RFC v3 00/24] Add RISC-V TCG backend support

[no-reply]

Patchew URL: https://patchew.org/QEMU/address@hidden/



Hi,

This series seems to have some coding style problems. See output below for
more information:

Message-id: address@hidden
Subject: [Qemu-devel] [RFC v3 00/24]  Add RISC-V TCG backend support
Type: series

=== TEST SCRIPT BEGIN ===
#!/bin/bash

BASE=base
n=1
total=$(git log --oneline $BASE.. | wc -l)
failed=0

git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram

commits="$(git log --format=%H --reverse $BASE..)"
for c in $commits; do
    echo "Checking PATCH $n/$total: $(git log -n 1 --format=%s $c)..."
    if ! git show $c --format=email | ./scripts/checkpatch.pl --mailback -; then
        failed=1
        echo
    fi
    n=$((n+1))
done

exit $failed
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
bd18a68 configure: Add support for building RISC-V host
4b6694e dias: Add RISC-V support
75231f4 tcg: Add RISC-V cpu signal handler
d11076a riscv: tcg-target: Add the target init code
7a29026 riscv: tcg-target: Add the prologue generation and register the JIT
cfbf3a4 riscv: tcg-target: Add the out op decoder
c9b64db riscv: tcg-target: Add direct load and store instructions
b3bce92 riscv: tcg-target: Add slowpath load and store instructions
f638bf5 riscv: tcg-target: Add branch and jump instructions
aad70de riscv: tcg-target: Add the add2 and sub2 instructions
b2aad81 riscv: tcg-target: Add the out load and store instructions
9e4ea2d riscv: tcg-target: Add the extract instructions
d1b0709 riscv: tcg-target: Add the mov and movi instruction
f8005d6 riscv: tcg-target: Add the relocation functions
451a32e riscv: tcg-target: Add the instruction emitters
8888c7f riscv: tcg-target: Add the immediate encoders
b6ab31a riscv: tcg-target: Add support for the constraints
ae54474 riscv: Add the tcg target registers
2fe9951 riscv: Add the tcg-target header file
291d809 exec: Add RISC-V GCC poison macro
eb8cb60 linux-user: riscv: Fix compile failure on riscv32 hosts
ba54a72 linux-user: Add host dependency for RISC-V 64-bit
f7775fe linux-user: Add host dependency for RISC-V 32-bit
faa86e4 elf.h: Add the RISCV ELF magic numbers

=== OUTPUT BEGIN ===
Checking PATCH 1/24: elf.h: Add the RISCV ELF magic numbers...
Checking PATCH 2/24: linux-user: Add host dependency for RISC-V 32-bit...
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#24: 
new file mode 100644

total: 0 errors, 1 warnings, 18 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 3/24: linux-user: Add host dependency for RISC-V 64-bit...
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#24: 
new file mode 100644

total: 0 errors, 1 warnings, 18 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 4/24: linux-user: riscv: Fix compile failure on riscv32 hosts...
WARNING: architecture specific defines should be avoided
#23: FILE: linux-user/riscv/target_syscall.h:51:
+#if !defined(__NR__llseek) && !defined(__NR_lseek)

total: 0 errors, 1 warnings, 11 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 5/24: exec: Add RISC-V GCC poison macro...
Checking PATCH 6/24: riscv: Add the tcg-target header file...
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#24: 
new file mode 100644

WARNING: architecture specific defines should be avoided
#56: FILE: tcg/riscv/tcg-target.h:28:
+#if __riscv_xlen == 32

total: 0 errors, 2 warnings, 182 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 7/24: riscv: Add the tcg target registers...
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#12: 
new file mode 100644

total: 0 errors, 1 warnings, 118 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 8/24: riscv: tcg-target: Add support for the constraints...
Checking PATCH 9/24: riscv: tcg-target: Add the immediate encoders...
Checking PATCH 10/24: riscv: tcg-target: Add the instruction emitters...
Checking PATCH 11/24: riscv: tcg-target: Add the relocation functions...
Checking PATCH 12/24: riscv: tcg-target: Add the mov and movi instruction...
Checking PATCH 13/24: riscv: tcg-target: Add the extract instructions...
Checking PATCH 14/24: riscv: tcg-target: Add the out load and store 
instructions...
Checking PATCH 15/24: riscv: tcg-target: Add the add2 and sub2 instructions...
Checking PATCH 16/24: riscv: tcg-target: Add branch and jump instructions...
Checking PATCH 17/24: riscv: tcg-target: Add slowpath load and store 
instructions...
Checking PATCH 18/24: riscv: tcg-target: Add direct load and store 
instructions...
ERROR: spaces required around that '*' (ctx:WxV)
#73: FILE: tcg/riscv/tcg-target.inc.c:1190:
+    tcg_insn_unit *label_ptr[1];
                   ^

ERROR: spaces required around that '*' (ctx:WxV)
#144: FILE: tcg/riscv/tcg-target.inc.c:1261:
+    tcg_insn_unit *label_ptr[1];
                   ^

total: 2 errors, 0 warnings, 161 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Checking PATCH 19/24: riscv: tcg-target: Add the out op decoder...
Checking PATCH 20/24: riscv: tcg-target: Add the prologue generation and 
register the JIT...
Checking PATCH 21/24: riscv: tcg-target: Add the target init code...
Checking PATCH 22/24: tcg: Add RISC-V cpu signal handler...
Checking PATCH 23/24: dias: Add RISC-V support...
WARNING: architecture specific defines should be avoided
#22: FILE: disas.c:526:
+#if defined(_ILP32) || (__riscv_xlen == 32)

total: 0 errors, 1 warnings, 16 lines checked

Your patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
Checking PATCH 24/24: configure: Add support for building RISC-V host...
=== OUTPUT END ===

Test command exited with code: 1


The full log is available at
http://patchew.org/logs/address@hidden/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to address@hidden