Re: [PATCH v7 1/2] hw/misc/riscv_iopmp: Add RISC-V IOPMP device

[Stefan Weil]

Am 12.06.24 um 05:17 schrieb Ethan Chen via:
> Support basic functions of IOPMP specification v0.9.1 rapid-k model.
> The specification url:
> https://github.com/riscv-non-isa/iopmp-spec/releases/tag/v0.9.1
>
> IOPMP check memory access from device is valid or not. This implementation uses
> IOMMU to change address space that device access. There are three possible
> results of an access: valid, blocked, and stalled(stall is not supported in this
>   patch).
>
> If an access is valid, target address space is downstream_as.
> If an access is blocked, it will go to blocked_io_as. The operation of
> blocked_io_as could be a bus error, or it can respond a success with fabricated
> data depending on IOPMP ERR_CFG register value.
>
> Signed-off-by: Ethan Chen <ethan84@andestech.com>
> ---
>   hw/misc/Kconfig               |    3 +
>   hw/misc/meson.build           |    1 +
>   hw/misc/riscv_iopmp.c         | 1002 +++++++++++++++++++++++++++++++++
>   hw/misc/trace-events          |    4 +
>   include/hw/misc/riscv_iopmp.h |  152 +++++
>   5 files changed, 1162 insertions(+)
>   create mode 100644 hw/misc/riscv_iopmp.c
>   create mode 100644 include/hw/misc/riscv_iopmp.h

Should both new files have SPDX license identifiers?

Regards,
Stefan W.