[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] question about print out of overrun and under run ind
From: |
Stephen |
Subject: |
[Discuss-gnuradio] question about print out of overrun and under run indication |
Date: |
Fri, 08 Jun 2012 22:27:47 -0500 |
User-agent: |
Mozilla/5.0 (Windows NT 5.1; rv:12.0) Gecko/20120428 Thunderbird/12.0.1 |
Hi,
I have a couple of questions about the print out of the overrun and
underun indications.
Is it possible to turn off the output of those indications?
And second is gnuradio doing anything with stdout that would affect
redirecting stdout?
This is the text output I normally see in a shell window.
(I don't see the ----- lines that just to separate the text)
-----------------------------------------------
-- USRP-B100 clock control: 10
-- r_counter: 2
-- a_counter: 0
-- b_counter: 20
-- prescaler: 8
-- vco_divider: 5
-- chan_divider: 5
-- vco_rate: 1600.000000MHz
-- chan_rate: 320.000000MHz
-- out_rate: 64.000000MHz
--
UHD Warning:
Unable to set the thread priority. Performance may be negatively
affected.
Please see the general application notes in the manual for instructions.
EnvironmentError: OSError: error in pthread_setschedparam
UHD Warning:
The hardware does not support the requested RX sample rate:
Target sample rate: 2.500000 MSps
Actual sample rate: 2.461538 MSps
>>> gr_fir_ccc: using SSE
>>> gr_fir_fff: using SSE
Using Volk machine: sse4_1_64_orc
------------------------------------------------
In my application I redirect stdout to a different buffer. Which works
at first. I get the following redirected to my buffer
----------------------------
-- USRP-B100 clock control: 10
-- r_counter: 2
-- a_counter: 0
-- b_counter: 20
-- prescaler: 8
-- vco_divider: 5
-- chan_divider: 5
-- vco_rate: 1600.000000MHz
-- chan_rate: 320.000000MHz
-- out_rate: 64.000000MHz
--
--------------------------------
after that nothing is redirected and everything goes back to being
output in the shell window. I'm not an expert on redirecting stdout but
is there anything in gnuradio that would make that stop working?
stephen
- [Discuss-gnuradio] question about print out of overrun and under run indication,
Stephen <=