[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Dvdrtools-users] dvdrtools v0.1.3 and recordable media
From: |
Robert M. Stockmann |
Subject: |
[Dvdrtools-users] dvdrtools v0.1.3 and recordable media |
Date: |
Tue, 14 Jan 2003 05:13:52 +0100 (CET) |
Hi,
I tested dvdrtools with a PIONEER DVD-RW DVR-105 burner.
[jackson:stock]:(~)$ dvdrecord --version
dvdrtools v0.1.3
Portions (c) 2002-2003 Ark Linux <address@hidden>
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
I tested with the original Pioneer 4x DVD-R recordable which is
inside the retail box :
[jackson:root]:(/mnt/dvdrip)# dvdrecord -v dev=2,1,0 -dao takedown.raw
dvdrtools v0.1.3
Portions (c) 2002-2003 Ark Linux <address@hidden>
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '2,1,0'
scsibus: 2 target: 1 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version: 0
Response Format: 2
Capabilities:
Vendor_info: 'PIONEER '
Identifikation: 'DVD-RW DVR-105 '
Revision: '1.21'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 4291 MB
Total size: 4928 MB (488:14.72) = 2197104 sectors
Lout start: 4928 MB (488:16/54) = 2197104 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 101392
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
dvdrecord: WARNING: Drive returns wrong startsec (0) using -150
Starting new track at sector: 0
Track 01: 4291 of 4291 MB written (fifo 100%).
Track 01: Total bytes read/written: 4499668992/4499668992 (2197104 sectors).
Writing time: 821.558s
Fixating...
Fixating time: 37.601s
dvdrecord: fifo had 70875 puts and 70875 gets.
dvdrecord: fifo was 0 times empty and 14350 times full, min fill was 89%.
[jackson:root]:(/mnt/dvdrip)#
Well this is quite good i think, this pioneer with firmware 1.21 seems to be
the fastest kid in town. However i tested also with some cheaper
recordables, the PRINCO DVD-R 1x,2x For Data & Video :
[jackson:root]:(/mnt/dvdrip)# dvdrecord -v speed=1 dev=2,1,0 -dao takedown.raw
dvdrtools v0.1.3
Portions (c) 2002-2003 Ark Linux <address@hidden>
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '2,1,0'
scsibus: 2 target: 1 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version: 0
Response Format: 2
Capabilities:
Vendor_info: 'PIONEER '
Identifikation: 'DVD-RW DVR-105 '
Revision: '1.21'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 4291 MB
Total size: 4928 MB (488:14.72) = 2197104 sectors
Lout start: 4928 MB (488:16/54) = 2197104 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 101392
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
dvdrecord: WARNING: Drive returns wrong startsec (0) using -150
Starting new track at sector: 0
Track 01: 3672 of 4291 MB written (fifo 98%).dvdrecord: Input/output error.
write_g1: scsi sendcmd: no error
CDB: 2A 00 00 1C B1 6D 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 1C AE B1 0E 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 1879729 (not valid)
cmd finished after 0.005s timeout 200s
write track data: error after 3851118592 bytes
Sense Bytes: 70 00 00 00 00 00 00 0E 00 00 00 00 00 00 00 00 00 00
Writing time: 1401.290s
Fixating...
Fixating time: 0.011s
dvdrecord: fifo had 60723 puts and 60660 gets.
dvdrecord: fifo was 0 times empty and 16517 times full, min fill was 90%.
[jackson:root]:(/mnt/dvdrip)#
This failing is quite reproducable on my system. 3 PRINCO recordables
just failed.
TIA
Robert
--
Robert M. Stockmann - RHCE
Network Engineer - UNIX Consultant
crashrecovery.org address@hidden
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Dvdrtools-users] dvdrtools v0.1.3 and recordable media,
Robert M. Stockmann <=