gpsd-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [gpsd-users] Make gpsd work with BU-353 S4 receiver


From: Benjamin Armbruster
Subject: Re: [gpsd-users] Make gpsd work with BU-353 S4 receiver
Date: Thu, 18 Oct 2012 23:50:51 +0200

Hi!

On Thu, 18 Oct 2012 14:17:49 -0700
Gary E. Miller <address@hidden> wrote:

> Yo Benjamin!
>
> Time to first fix is a lot longer than the non-S4
Well, this is not so important to me. I found the fix times quite acceptable. 
But ...

> Sensitivity is a lot less than the non-S4
... this is where slight concerns are arising. Could you tell me how much 
difference
there is between those two units? Is the -S4 still usable in car navigation or
complete useless?
I also noticed inaccuracies myself with static positioning, but I do not know 
if the
non-S4 would perform so much better...

> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97701
>        address@hidden  Tel:+1(541)382-8588

> signature.asc
> Description: PGP signature

P.S. Thanks for your input so far! 

Regards, Benni



reply via email to

[Prev in Thread] Current Thread [Next in Thread]