host_config.log.tar.gzDescription: GNU Zip compressed data
|
| From: | Dick Tseng |
| Subject: | Re: [Ltib] Help LTIB Installing |
| Date: | Fri, 3 Jul 2009 09:02:52 +0800 |
Hi Dick,
You don't need to reinstall your distro. Send your host_config.log so I can see what the error is, please compress this first
(gzip host_config.log and then send as an attachement)
Regards, Stuart
Dick Tseng wrote:
Hi Stuart,
When I execute the "./ltib", it's very soon to show error that tell me to see host_config.log.
So I think it fail.
But I'll reinstall the Linux, what distribution are you suggest ?Ubuntu? Fedora ?....
Thank you very much.
Best regards,
Dick
2009/7/2 Stuart Hughes <address@hidden <mailto:address@hidden>>
Hi Dick,
I can't tell whether it succeeded or not. You need to cut and paste
the output if you think there was a failure.
Regards, Stuart
Dick Tseng wrote:
Hi Stuart,
What's the next step ?It's to mean the LTIB to be success ?
But when I execute the "./LTIB", it'll interrupt and show error
message.
I want complier the imx27ads image file.
Thank you for your help.
Best regards,
Dick
2009/7/2 Stuart Hughes <address@hidden <mailto:address@hidden>Hi Dick,
This is not an error. Â It's telling you why it's building
the package.
Regards, Stuart
Dick Tseng wrote:
Hi All,
I tried the net install.
When finish the install LTIB and excute command "./ltib
--preconfig config/platform/imx27ads/defconfig --batch
I got the error message from host_config.log isÂ
"
Processing: rpm-fs
Build path taken because: no prebuilt rpm,
Testing network connectivity
"
But I can't find any answer about "prebuilt rpm"
Do you have any suggest ?
Thank you very much.
Best regards,
Dick
2009/7/1 Hamilton Vera <address@hidden
<mailto:address@hidden>
<mailto:address@hidden
<mailto:address@hidden>>
<mailto:address@hidden
<mailto:address@hidden>
<mailto:address@hidden
<mailto:address@hidden>>>>
  Hi Dick, it would be better if you use the cvs to
download
the most
  recent version of ltib:
  i.e:
  cd /home/
  sudo apt-get install ssh openbsd-inetd xinetd nfs-common
  nfs-kernel-server
  sudo apt-get install patch g++ rpm zlib1g-dev m4 bison
libncurses5-dev
  libglib2.0-dev gettext build-essential libfreetype6
libfreetype6-dev
  cvs
  wget http://www.ltib.org/pages/netinstall.txt
  perl netinstall.txt
  Check http://www.ltib.org/resources-download  and
  http://www.imxdev.org ( it is for the imx family,
but you
can use many
  tips from there).
  [] s
  Hamilton Vera
  On Tue, Jun 30, 2009 at 11:11 PM, Dick
Tseng<address@hidden <mailto:address@hidden><mailto:address@hidden <mailto:address@hidden>>
  <mailto:address@hidden
<mailto:address@hidden>
<mailto:address@hidden
<mailto:address@hidden>>>> wrote:
  > Hi All,
  > I don't know how to get any output for you.
  > I'll write down my install rule.
  > 1. Install Debain (default setting)
  > 2. Download LTIB with http://www.bitshrine.org/
  > 3. Unzip ltib-8-1-2a-sv.tar.gz
  > 4. /usr/sbin/visudo
  > 5. Add setting "dick   ALL = NOPASSWD:
/bin/rpm,
  > /opt/freescale/ltib/usr/bin/rpm"
  > 6. apt-get install m4
  > 7. apt-get install bison
  > 8. apt-get install patch
  > 9. apt-get install build-essential
  > 10.apt-get install libncurses5-dev
  > 11.apt-get install zlib1g-dev
  > 12.apt-get install rpm
  > 13. excute command "./ltib --preconfig
  > config/platform/imx27ads/defconfig.dev  --batch
  > Then got the error message,
  > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  > Testing ppp_url connectivity: FAIL, disabling
  > Testing gpp_url connectivity: "
  > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  > I have some question,
  > 1. Did install the LTIB need the CVS ?
  > 2. Did install the LTIB need Fix IP ?
  > Thank you very much.
  > Best Regards,
  > Dick
  > 2009/6/30 Stuart Hughes <address@hidden
<mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>><mailto:address@hidden <mailto:address@hidden> <mailto:address@hidden
<mailto:address@hidden>>>>
  >>  >> Hi Dick,
  >>
  >> You do not need to change any settings for ppp_url,
this may
  fail, but you
  >> will then fallback to gpp_url, which is the one
which
will work.
  >>
  >> Please send some actual output to help diagnose your
problem.
  >>
  >> Regards, Stuart
  >>
  >> Dick Tseng wrote:
  >>>
  >>> Dear All,
  >>>
  >>> Thank you for your support. Â  :)
  >>> I think the key point is "%ppp_url" setting.
  >>> Because I can't visit
"http://lurcher/ltib/ppp/" this
web site.
  >>> My company don't have proxy and firewall.
  >>> How did your .ltibrc setting ?
  >>> Thank you again.
  >>>
  >>> Best Regards,
  >>> Dick
  >>>
  >>> 2009/6/30 Stuart Hughes <address@hidden
<mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>><mailto:address@hidden <mailto:address@hidden> <mailto:address@hidden
<mailto:address@hidden>>>
  <mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>
<mailto:address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>>>>
  >>>
  >>> Â  Â Hi Dick,
  >>>
  >>> Â  Â See Hamilton's reply, you need to be
able to
access the
  internet to
  >>> Â  Â install LTIB.
  >>>
  >>> Â  Â Regards, Stuart
  >>>
  >>> Â  Â Dick Tseng wrote:
  >>>
  >>> Â  Â  Â  Â Dear all,
  >>>
  >>> Â  Â  Â  Â Sorry to bother you.
  >>> Â  Â  Â  Â I have a question with LTIB
Installing.
  >>>
  >>> Â  Â  Â  Â When I install LTIB, I excute the
  "./ltib"(Installing host
  >>>   Â  Â  Â support packages)Â It was
interrupt and got the
  error message
  >>> Â  Â  Â  Â from host_config.log
  >>>   Â  Â  Â The error message is "
  >>>   Â  Â  Â Â Testing ppp_url
connectivity:
FAIL, disabling
  >>>   Â  Â  Â Â Testing gpp_url
connectivity:Â "
  >>>
  >>> Â  Â  Â  Â Could you help me this issue? or
give me some ideas?
  >>> Â  Â  Â  Â Thank you very much.
  >>>
  >>> Â  Â  Â  Â Best Regards,
  >>>   Â  Â  Â DickÂ
  >>>
  >>>
host_config.log.tar.gz
Description: GNU Zip compressed data
| [Prev in Thread] | Current Thread | [Next in Thread] |