Re: [Protux-devel] protux hangs during soundcard detection.

[Reinhard Amersberger]

address@hidden, address@hidden schrieb am 21.09.03 21:21:28:
> 
> Hi Reinhard,
> 
> I have the same problem, and I think it's due the soundcard used by another 
> app. like artsd.


Right, this is a well known problem, so artsd is already disabled on my machine 
a long time ago because of this problem.
So, maybe as a conclusion and as far as I understand, it would be very helpful 
to have libmustux work similar to jackd, right?
Because it could be possible that for some (or many) users it is essential to 
have artsd running?
Or is there another sulution?

 
> If such a program runs on your computer, shut it down, or wait until it frees 
> your soundcard, then protux will continue start.


Ok, I will have to look over more precisely.

greetings
Reinhard

 
> Cheers,
> 
> Remon
> 
> On Sunday 21 September 2003 21:17, booker wrote:
> > Hi,
> >
> > it seems that some of the latest changes had some effect on the soundcard
> > detection process, because from now on I can't start protux no longer, it
> > hangs here:
> >
> > address@hidden protux]$ p4
> > ENTERING Main.cc::main
> > Loading required GL library /usr/X11R6/lib/libGL.so.1.2
> >    ENTERING MustuxApplication (CONSTRUCTOR)
> >    LEAVING MustuxApplication (CONSTRUCTOR)
> >    ENTERING Protux (CONSTRUCTOR)
> >       ENTERING GlobalProperties.cc::init
> >          [ Added property SLICE_WIDTH_FACTOR = 1  ]
> >          [ Added property JMB_CLEAR_TIME = 2000  ]
> >          [ Added property JMB_HOLD_SENSITIVENESS_FACTOR = 10  ]
> >          [ Added property JMB_DOUBLE_PRESS_INTERVAL = 200  ]
> >          [ Added property DEFAULT_NUM_TRACKS = 6  ]
> >          [ Added property HZOOM_LEVEL = 18  ]
> >          [ Added property DEFAULT_SAMPLE_RATE = 44100  ]
> >          [ Added property DEFAULT_BIT_DEPTH = 16  ]
> >          [ Added property AUDIO_MAPPER_FPS = 20  ]
> >          [ Added property USE_PLUGHW = NO  ]
> >          [ Added property USE_EXTERNAL_OGG_DECODER = 1  ]
> >          [ Added property USE_EXTERNAL_OGG_ENCODER = 1  ]
> >          [ Added property MP3_DECODE_COMMAND = mpg123 -w %of %if  ]
> >          [ Added property OGG_DECODE_COMMAND = ogg123 -d wav -f %of %if  ]
> >          [ Added property OGG_ENCODE_COMMAND = oggenc -b 320 -o %of %if  ]
> >       LEAVING GlobalProperties.cc::init
> >       ENTERING MustuxAudioDeviceMapper.cc::init
> >          [ Found ALSA supported Card : EMU10K1 - Sound Blaster Live! ]
> >          ENTERING Bus (CONSTRUCTOR)
> >             [ PLABACK Bus 0 [ card 0 ] : "EMU10K1 - 1st OUT (plughw:0,3)"
> > created ]
> >          LEAVING Bus (CONSTRUCTOR)
> >          ENTERING Bus (CONSTRUCTOR)
> >             [ MustuxAudioDeviceMapper::CAPTURE Bus 0 [ card 0 ] : "EMU10K1
> > - 1st IN (plughw:0,2)" created ]
> >          LEAVING Bus (CONSTRUCTOR)
> >          ENTERING Bus (CONSTRUCTOR)
> >             [ MustuxAudioDeviceMapper::CAPTURE Bus 1 [ card 0 ] : "EMU10K1
> > - 2nd IN (plughw:0,1)" created ]
> >          LEAVING Bus (CONSTRUCTOR)
> >          ENTERING Bus (CONSTRUCTOR)
> >             [ PLABACK Bus 1 [ card 0 ] : "EMU10K1 - 2nd OUT (plughw:0,0)"
> > created ]
> >          LEAVING Bus (CONSTRUCTOR)
> >          ENTERING Bus (CONSTRUCTOR)
> >             [ MustuxAudioDeviceMapper::CAPTURE Bus 2 [ card 0 ] : "EMU10K1
> > - 3rd IN (plughw:0,0)" created ]
> >          LEAVING Bus (CONSTRUCTOR)
> >
> >          [ Probing CAPTURE Buses
> > ------------------------------------------------ ]
> >          ENTERING MustuxAudioBus.cc::probe_valid_modes
> >             [ Probing valid modes for bus  0:0 ... ]
> >             [   Trying 22050 Hz MONO 16 bits :             ENTERING
> > MustuxAudioBus.cc::supports
> >
> >
> >
> > greetings
> > Reinhard
> >
> >
> > _______________________________________________
> > Protux-devel mailing list
> > address@hidden
> > http://mail.nongnu.org/mailman/listinfo/protux-devel
> 
> 
> 
> _______________________________________________
> Protux-devel mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/protux-devel