qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [Qemu-ppc] Incorrect handling of more PPC64 insns (PATC


From: Alexander Graf
Subject: Re: [Qemu-devel] [Qemu-ppc] Incorrect handling of more PPC64 insns (PATCH)
Date: Wed, 8 May 2013 00:00:47 +0200


Am 07.05.2013 um 21:30 schrieb Torbjorn Granlund <address@hidden>:

> I realised a possible problem with my suggested patch.
> 
> What about a 32-bit processor?  Then NARROW_MODE macro is identical 0.
> 
> The pre-patch behaviour was then to ignore the L bit and decode both
> 32-bit and 64-bit instruction in the same way.
> 
> Apparently that is correct behaviour.  (The manual is slightly vague,
> but I let hardware decide.)
> 
> With my patch, the bit is not ignored, and invalid code will be
> generated for 32-bit targets, if they'd set the L bit.
> 
> Here is an uglier but hopefully completely correct patch.
> 
> diff --git a/target-ppc/translate.c b/target-ppc/translate.c
> index 1a84653..69d684c 100644
> --- a/target-ppc/translate.c
> +++ b/target-ppc/translate.c
> @@ -675,49 +675,65 @@ static inline void gen_set_Rc0(DisasContext *ctx, TCGv 
> reg)
> /* cmp */
> static void gen_cmp(DisasContext *ctx)
> {
> -    if (NARROW_MODE(ctx) || !(ctx->opcode & 0x00200000)) {
> +#if defined(TARGET_PPC64)
> +    if (!(ctx->opcode & 0x00200000)) {

The ppc64 target can also execute as ppc32 CPU if you pass in the correct -cpu 
value. So this one looks slightly bogus...

Alex

> +#endif
>         gen_op_cmp32(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rB(ctx->opcode)],
>                      1, crfD(ctx->opcode));
> +#if defined(TARGET_PPC64)
>     } else {
>         gen_op_cmp(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rB(ctx->opcode)],
>                    1, crfD(ctx->opcode));
>     }
> +#endif
> }
> 
> /* cmpi */
> static void gen_cmpi(DisasContext *ctx)
> {
> -    if (NARROW_MODE(ctx) || !(ctx->opcode & 0x00200000)) {
> +#if defined(TARGET_PPC64)
> +    if (!(ctx->opcode & 0x00200000)) {
> +#endif
>         gen_op_cmpi32(cpu_gpr[rA(ctx->opcode)], SIMM(ctx->opcode),
>                       1, crfD(ctx->opcode));
> +#if defined(TARGET_PPC64)
>     } else {
>         gen_op_cmpi(cpu_gpr[rA(ctx->opcode)], SIMM(ctx->opcode),
>                     1, crfD(ctx->opcode));
>     }
> +#endif
> }
> 
> /* cmpl */
> static void gen_cmpl(DisasContext *ctx)
> {
> -    if (NARROW_MODE(ctx) || !(ctx->opcode & 0x00200000)) {
> +#if defined(TARGET_PPC64)
> +    if (!(ctx->opcode & 0x00200000)) {
> +#endif
>         gen_op_cmp32(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rB(ctx->opcode)],
>                      0, crfD(ctx->opcode));
> +#if defined(TARGET_PPC64)
>     } else {
>         gen_op_cmp(cpu_gpr[rA(ctx->opcode)], cpu_gpr[rB(ctx->opcode)],
>                    0, crfD(ctx->opcode));
>     }
> +#endif
> }
> 
> /* cmpli */
> static void gen_cmpli(DisasContext *ctx)
> {
> -    if (NARROW_MODE(ctx) || !(ctx->opcode & 0x00200000)) {
> +#if defined(TARGET_PPC64)
> +    if (!(ctx->opcode & 0x00200000)) {
> +#endif
>         gen_op_cmpi32(cpu_gpr[rA(ctx->opcode)], UIMM(ctx->opcode),
>                       0, crfD(ctx->opcode));
> +#if defined(TARGET_PPC64)
>     } else {
>         gen_op_cmpi(cpu_gpr[rA(ctx->opcode)], UIMM(ctx->opcode),
>                     0, crfD(ctx->opcode));
>     }
> +#endif
> }
> 
> /* isel (PowerPC 2.03 specification) */
> 
> -- 
> Torbjörn



reply via email to

[Prev in Thread] Current Thread [Next in Thread]