[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 19/28] target-arm: Split AArch64 cases out of ats_wri
From: |
Peter Maydell |
Subject: |
[Qemu-devel] [PULL 19/28] target-arm: Split AArch64 cases out of ats_write() |
Date: |
Thu, 5 Feb 2015 14:02:58 +0000 |
Instead of simply reusing ats_write() as the handler for both AArch32
and AArch64 address translation operations, use a different function
for each with the common code in a third function. This is necessary
because the semantics for selecting the right translation regime are
different; we are only getting away with sharing currently because
we don't support EL2 and only support EL3 in AArch32.
Signed-off-by: Peter Maydell <address@hidden>
Reviewed-by: Greg Bellows <address@hidden>
Reviewed-by: Edgar E. Iglesias <address@hidden>
---
target-arm/helper.c | 33 ++++++++++++++++++++++++++-------
1 file changed, 26 insertions(+), 7 deletions(-)
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 85d02af..6470d6a 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1458,13 +1458,13 @@ static CPAccessResult ats_access(CPUARMState *env,
const ARMCPRegInfo *ri)
return CP_ACCESS_OK;
}
-static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+static uint64_t do_ats_write(CPUARMState *env, uint64_t value,
+ int access_type, int is_user)
{
hwaddr phys_addr;
target_ulong page_size;
int prot;
- int ret, is_user = ri->opc2 & 2;
- int access_type = ri->opc2 & 1;
+ int ret;
uint64_t par64;
ret = get_phys_addr(env, value, access_type, is_user,
@@ -1504,9 +1504,28 @@ static void ats_write(CPUARMState *env, const
ARMCPRegInfo *ri, uint64_t value)
((ret & 0xf) << 1) | 1;
}
}
+ return par64;
+}
+
+static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+ int is_user = ri->opc2 & 2;
+ int access_type = ri->opc2 & 1;
+ uint64_t par64;
+
+ par64 = do_ats_write(env, value, access_type, is_user);
A32_BANKED_CURRENT_REG_SET(env, par, par64);
}
+
+static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ int is_user = ri->opc2 & 2;
+ int access_type = ri->opc2 & 1;
+
+ env->cp15.par_el[1] = do_ats_write(env, value, access_type, is_user);
+}
#endif
static const ARMCPRegInfo vapa_cp_reginfo[] = {
@@ -2280,16 +2299,16 @@ static const ARMCPRegInfo v8_cp_reginfo[] = {
/* 64 bit address translation operations */
{ .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 0,
- .access = PL1_W, .type = ARM_CP_NO_RAW, .writefn = ats_write },
+ .access = PL1_W, .type = ARM_CP_NO_RAW, .writefn = ats_write64 },
{ .name = "AT_S1E1W", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 1,
- .access = PL1_W, .type = ARM_CP_NO_RAW, .writefn = ats_write },
+ .access = PL1_W, .type = ARM_CP_NO_RAW, .writefn = ats_write64 },
{ .name = "AT_S1E0R", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 2,
- .access = PL1_W, .type = ARM_CP_NO_RAW, .writefn = ats_write },
+ .access = PL1_W, .type = ARM_CP_NO_RAW, .writefn = ats_write64 },
{ .name = "AT_S1E0W", .state = ARM_CP_STATE_AA64,
.opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 3,
- .access = PL1_W, .type = ARM_CP_NO_RAW, .writefn = ats_write },
+ .access = PL1_W, .type = ARM_CP_NO_RAW, .writefn = ats_write64 },
#endif
/* TLB invalidate last level of translation table walk */
{ .name = "TLBIMVALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5,
--
1.9.1
- [Qemu-devel] [PULL 25/28] disas/arm-a64.cc: Tell libvixl correct code addresses, (continued)
- [Qemu-devel] [PULL 25/28] disas/arm-a64.cc: Tell libvixl correct code addresses, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 20/28] target-arm: Pass mmu_idx to get_phys_addr(), Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 23/28] target-arm: Fix brace style in reindented code, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 12/28] hw/arm/virt: explain device-to-transport mapping in create_virtio_devices(), Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 22/28] target-arm: Reindent ancient page-table-walk code, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 17/28] target-arm: Use correct mmu_idx for unprivileged loads and stores, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 11/28] target-arm: check that LSB <= MSB in BFI instruction, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 08/28] target-arm: Add checks that cpreg raw accesses are handled, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 18/28] target-arm: Don't define any MMU_MODE*_SUFFIXes, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 15/28] target-arm/translate-a64: Fix wrong mmu_idx usage for LDT/STT, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 19/28] target-arm: Split AArch64 cases out of ats_write(),
Peter Maydell <=
- [Qemu-devel] [PULL 06/28] target-arm: Add missing SP_ELx register definition, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 03/28] target-arm: Fix RVBAR_EL1 register encoding, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 21/28] target-arm: Use mmu_idx in get_phys_addr(), Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 09/28] Fix FMULX not squashing denormalized inputs when FZ is set., Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 14/28] target-arm: Make arm_current_el() return sensible values for M profile, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 16/28] target-arm: Define correct mmu_idx values and pass them in TB flags, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 04/28] target-arm: Add extended RVBAR support, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 13/28] cpu_ldst.h: Allow NB_MMU_MODES to be 7, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 10/28] target-arm: Squash input denormals in FRECPS and FRSQRTS, Peter Maydell, 2015/02/05
- [Qemu-devel] [PULL 05/28] target-arm: Change reset to highest available EL, Peter Maydell, 2015/02/05