Re: [Ltib] ltib rpm staging confusion

[Stuart Hughes]

Hi Mike,

I know you've moved back to the FSL BSP, but I wonder if you could help 
me track this down. I've been making changes in this area and want to 
make sure I haven't introduced bugs.

I just re-tried and and it worked for me.  What you should see is the 
rpm files being downloaded.

Processing platform: host support
===================================

Processing: rpm-fs
====================
Build path taken because: no prebuilt rpm,
Testing network connectivity
OK GPP:

Try rpm-4.0.4.tar.gz.md5 from the GPP
11:27:55 URL:http://bitshrine.org/gpp/rpm-4.0.4.tar.gz.md5 [50/50] -> 
"rpm-4.0.4.tar.gz.md5" [1]
Try rpm-4.0.4.tar.gz from the GPP
....

Can you do:
$ rm -rf /tmp/rpm*
$ ./ltib

and see if that works, if not I'll need to investigate further.


BTW: the change I made is that the downloads go into /tmp/rpm-_user_/..
so that when this area is cleaned up the downloads are removed to keep 
/tmp clean.

Regards, Stuart


Mike Goins wrote:
> I an a bit confused about where the local files are stored and how
> that is defined.  This ltib was checked out of savannah yesterday:
>
>
> Processing platform: host support
> ===================================
>
> Processing: rpm-fs
> ====================
> Build path taken because: no prebuilt rpm,
>
> /usr/bin/rpmbuild --dbpath ///tmp/rpm-mikegoins/rpmdb --target i686
> --define '_unpackaged_files_terminate_build 0' --define '_target_cpu
> i686' --define '__strip strip' --define '_topdir /tmp/rpm-mikegoins'
> --define '_prefix /opt/ltib/usr' --define '_tmppath /mnt/hd/ltib/tmp'
> --define '_rpmdir /tmp/rpm-mikegoins/RPMS'  --define '_mandir
> /opt/ltib/usr/share/man' --define '_sysconfdir /opt/ltib/etc' --define
> '_localstatedir /var' -bb --clean --rmsource
> /mnt/hd/ltib/dist/lfs-5.1/rpm/rpm-fs.spec
> error: File /tmp/rpm-mikegoins/rpm-fs/rpm-4.0.4.tar.gz: No such file
> or directory
> Building target platforms: i686
> Building for target i686
> Build time for rpm-fs: 0 seconds
>
> Failed building rpm-fs
> could not glob rpm in: /tmp/rpm-mikegoins/RPMS/i686/rpm-fs-* at ./ltib
> line 2406.
> traceback:
>  main::check_rpm_setup:2406
>   main::host_checks:1433
>    main:540
>
>
> Started: Tue Jul  7 13:30:25 2009
> Ended:   Tue Jul  7 13:30:25 2009
> Elapsed: 0 seconds
>
> These packages failed to build:
> rpm-fs
>
> Build Failed
>
>
> Below is the file listing but it does not match the path from the log:
>
> > find /tmp/rpm-mikegoins/
> /tmp/rpm-mikegoins/
> /tmp/rpm-mikegoins/RPMS
> /tmp/rpm-mikegoins/BUILD
> /tmp/rpm-mikegoins/SPECS
> /tmp/rpm-mikegoins/SRPMS
> /tmp/rpm-mikegoins/rpmdb
> /tmp/rpm-mikegoins/rpmdb/Packages
> /tmp/rpm-mikegoins/SOURCES
> /tmp/rpm-mikegoins/SOURCES/rpm_lfs.patch
> /tmp/rpm-mikegoins/SOURCES/rpm-4.0.4.tar.gz
> /tmp/rpm-mikegoins/SOURCES/rpm-4.0.4-sysconfig-configure.patch
> /tmp/rpm-mikegoins/SOURCES/rpm-4.0.4-python-configure.patch
> /tmp/rpm-mikegoins/SOURCES/rpm-4.0.4-no-usr-local.patch
>
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib