Re: Interesting error messages with heatbugs.

[bleydorf]

Yeah,
This is the same errors, I mentioned a couple weeks ago, but no one got
back to me about it, except KC.  KC suggested this:
> I would guess that either tcl or tk or blt isn't "happy"
> about its setup.  For example when I was trying to add the
> tix extension to tk into the heatbugs code I screwed up
> blt's configuration.  When that happened it caused a lot of
> errors to scroll on my terminal window whenever one the blt
> widgets experienced a mouse event.

But, I didn't hear from anyone else.  Good luck, if you figure it out,
please drop me a line too.

Thanks,
Brad.

ps.  Thanks for the colors help.  


Paul Johnson wrote:
> 
> I decided to try the binary install and, thanks to the handy tips
> compiled in the FAQ, the installation was pretty easy.  Heatbugs ran
> OK, but then this ODD thing happened.  I was starting and stopping the
> simulation, changing the random move probability, sometimes singling
> out one bug for monitoring with a right click (and the change in
> probability did not show up,incidentally), and then in the xterm
> from which I executed heatbugs, I see this massive pile of errors.
> They did not happen when the sim first started, but after starting and
> stopping and pointing to one bug for detail.
> 
> Since I'm still learning about programming, I have no clue what
> these are, or what I should do about them.  Is this a job for debugger?
> Don't be afraid to speak on a very basic level.
> 
> Paul Johnson
> Associate Professor
> University of Kansas
> 
> "unknown_pre_tclObjc $name $args"
>     invoked from within
> "if {[llength [info procs unknown_pre_tclObjc]]} {
>        unknown_pre_tclObjc $name $args
>      } else {
>        error "in unknown: invalid command name: ..."
>     invoked from within
> "if {[string match address@hidden $name]} {
>      return [uplevel tclObjc_msg_send $name $args]
>    } else {
>      if {[llength [info procs unknown_pre_tclObjc]]}  ..."
>     (procedure "unknown" line 2)
>     invoked from within
> ".w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b3730
> delete 0 end"
> while evaluating:
> .w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b3730
> delete 0 end;
> .w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b3730
> insert 0 "3"
> (Tcl -eval:) invalid command name
> ".w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b4668"
>     while executing
> "unknown_pre_tclObjc $name $args"
>     invoked from within
> "if {[llength [info procs unknown_pre_tclObjc]]} {
>        unknown_pre_tclObjc $name $args
>      } else {
>        error "in unknown: invalid command name: ..."
>     invoked from within
> "if {[string match address@hidden $name]} {
>      return [uplevel tclObjc_msg_send $name $args]
>    } else {
>      if {[llength [info procs unknown_pre_tclObjc]]}  ..."
> 
>       unknown_pre_tclObjc $name $args
>      } else {
>        error "in unknown: invalid command name: ..."
>     invoked from within
> "if {[string match address@hidden $name]} {
>      return [uplevel tclObjc_msg_send $name $args]
>    } else {
>      if {[llength [info procs unknown_pre_tclObjc]]}  ..."
>     (procedure "unknown" line 2)
>     invoked from within
> ".w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b4668
> delete 0 end"
> while evaluating:
> .w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b4668
> delete 0 end;
> .w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b4668
> insert 0 "46"
> (Tcl -eval:) invalid command name
> ".w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b5668"
>     while executing
> "unknown_pre_tclObjc $name $args"
>     invoked from within
> "if {[llength [info procs unknown_pre_tclObjc]]} {
>        unknown_pre_tclObjc $name $args
>      } else {
>        error "in unknown: invalid command name: ..."
>     invoked from within
> "if {[string match address@hidden $name]} {
>      return [uplevel tclObjc_msg_send $name $args]
>    } else {
>      if {[llength [info procs unknown_pre_tclObjc]]}  ..."
>     (procedure "unknown" line 2)
>     invoked from within
> ".w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b5668
> delete 0 end"
> while evaluating:
> .w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b5668
> delete 0 end;
> .w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b5668
> insert 0 "20801"
> (Tcl -eval:) invalid command name
> ".w0x82aeba0.w0x82aeeb8.w0x82af108.w0x82af930.w0x82b1288.w0x82b1908.w0x82b65a0"
>     while executing
> "unknown_pre_tclObjc $name $args"
>     invoked from within
> "if {[llength [info procs unknown_pre_tclObjc]]} {
>        unknown_pre_tclObjc $name $args
>      } else {
>        error "in unknown: invalid command name: ..."
>     invoked from within
> "if {[string match address@hidden $name]} {
>      return [uplevel tclObjc_msg_send $name $args]
>    } else {
>      if {[llength [info procs unknown_pre_tclObjc]]}  ..."
>     (procedure "unknown" line 2)
> 
>                   ==================================
>    Swarm-Support is for discussion of the technical details of the day
>    to day usage of Swarm.  For list administration needs (esp.
>    [un]subscribing), please send a message to <address@hidden>
>    with "help" in the body of the message.
>                   ==================================

                  ==================================
   Swarm-Support is for discussion of the technical details of the day
   to day usage of Swarm.  For list administration needs (esp.
   [un]subscribing), please send a message to <address@hidden>
   with "help" in the body of the message.
                  ==================================