[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Simulavr-devel] Help with New Example
From: |
Schwichtenberg, Knut |
Subject: |
Re: [Simulavr-devel] Help with New Example |
Date: |
Tue, 31 Mar 2009 08:49:57 +0200 |
First of all I have to highlight an error in my previous mail:
I could *NOT* get the transmission from the PC to the feedback demo to work!
Sorry, but reading and pressing the send button seems to been done by different
persons inside me :-).
Joel Sherrill wrote:
>> What I could get to work is the opposite direction from the window to the
>> avr. I
>> thought your feedback application is close to the stdio-example, that also
>> handles receiving of data.
>> Any ideas?
>
> So you are confirming my understanding which makes it rather challenging
> to reassemble the bits.
Yes, so I would welcome a simplified window output showing the transmitted data
and if possible transmission "specialities" - such as break detected, framing
errors, ... One might think about this window to be a stupid character display
for all 256 values or something like a vt100 emulation.
> Would it be ok to add a "pin" which transmitted the entire byte at
> the end of the character being clocked out?
>
>
> A magic pin to hook higher level simulations too.
Yes, but what is the interface of that higher level simulation? There is a need
to show the receiver parameters, received character and possible errors in a
window. The rest is for future extension if a higher level simulation is
decided.
Knut
----------------------------------------------------------------------
This mail is made from 100% recycled electrons.
- Re: [Simulavr-devel] Help with New Example, (continued)
- Re: [Simulavr-devel] Help with New Example, Knut Schwichtenberg, 2009/03/29
- Re: [Simulavr-devel] Help with New Example, Joel Sherrill, 2009/03/30
- Re: [Simulavr-devel] Help with New Example, Knut Schwichtenberg, 2009/03/30
- Re: [Simulavr-devel] Help with New Example, Joel Sherrill, 2009/03/30
- Re: [Simulavr-devel] Help with New Example, Joel Sherrill, 2009/03/30
- Re: [Simulavr-devel] Help with New Example, Knut Schwichtenberg, 2009/03/30
- Re: [Simulavr-devel] Help with New Example, Joel Sherrill, 2009/03/30
- wish versus tclsh was Re: [Simulavr-devel] Help with New Example, Joel Sherrill, 2009/03/30
- Re: wish versus tclsh was Re: [Simulavr-devel] Help with New Example, Knut Schwichtenberg, 2009/03/30
- Re: wish versus tclsh was Re: [Simulavr-devel] Help with New Example, Joel Sherrill, 2009/03/30
Re: [Simulavr-devel] Help with New Example,
Schwichtenberg, Knut <=