[Protux-devel] protux hangs during soundcard detection.

[booker]

Hi,

it seems that some of the latest changes had some effect on the soundcard 
detection process, because from now on I can't start protux no longer, it 
hangs here:

address@hidden protux]$ p4
ENTERING Main.cc::main
Loading required GL library /usr/X11R6/lib/libGL.so.1.2
   ENTERING MustuxApplication (CONSTRUCTOR)
   LEAVING MustuxApplication (CONSTRUCTOR)
   ENTERING Protux (CONSTRUCTOR)
      ENTERING GlobalProperties.cc::init
         [ Added property SLICE_WIDTH_FACTOR = 1  ]
         [ Added property JMB_CLEAR_TIME = 2000  ]
         [ Added property JMB_HOLD_SENSITIVENESS_FACTOR = 10  ]
         [ Added property JMB_DOUBLE_PRESS_INTERVAL = 200  ]
         [ Added property DEFAULT_NUM_TRACKS = 6  ]
         [ Added property HZOOM_LEVEL = 18  ]
         [ Added property DEFAULT_SAMPLE_RATE = 44100  ]
         [ Added property DEFAULT_BIT_DEPTH = 16  ]
         [ Added property AUDIO_MAPPER_FPS = 20  ]
         [ Added property USE_PLUGHW = NO  ]
         [ Added property USE_EXTERNAL_OGG_DECODER = 1  ]
         [ Added property USE_EXTERNAL_OGG_ENCODER = 1  ]
         [ Added property MP3_DECODE_COMMAND = mpg123 -w %of %if  ]
         [ Added property OGG_DECODE_COMMAND = ogg123 -d wav -f %of %if  ]
         [ Added property OGG_ENCODE_COMMAND = oggenc -b 320 -o %of %if  ]
      LEAVING GlobalProperties.cc::init
      ENTERING MustuxAudioDeviceMapper.cc::init
         [ Found ALSA supported Card : EMU10K1 - Sound Blaster Live! ]
         ENTERING Bus (CONSTRUCTOR)
            [ PLABACK Bus 0 [ card 0 ] : "EMU10K1 - 1st OUT (plughw:0,3)" 
created ]
         LEAVING Bus (CONSTRUCTOR)
         ENTERING Bus (CONSTRUCTOR)
            [ MustuxAudioDeviceMapper::CAPTURE Bus 0 [ card 0 ] : "EMU10K1 - 
1st IN (plughw:0,2)" created ]
         LEAVING Bus (CONSTRUCTOR)
         ENTERING Bus (CONSTRUCTOR)
            [ MustuxAudioDeviceMapper::CAPTURE Bus 1 [ card 0 ] : "EMU10K1 - 
2nd IN (plughw:0,1)" created ]
         LEAVING Bus (CONSTRUCTOR)
         ENTERING Bus (CONSTRUCTOR)
            [ PLABACK Bus 1 [ card 0 ] : "EMU10K1 - 2nd OUT (plughw:0,0)" 
created ]
         LEAVING Bus (CONSTRUCTOR)
         ENTERING Bus (CONSTRUCTOR)
            [ MustuxAudioDeviceMapper::CAPTURE Bus 2 [ card 0 ] : "EMU10K1 - 
3rd IN (plughw:0,0)" created ]
         LEAVING Bus (CONSTRUCTOR)

         [ Probing CAPTURE Buses 
------------------------------------------------ ]
         ENTERING MustuxAudioBus.cc::probe_valid_modes
            [ Probing valid modes for bus  0:0 ... ]
            [   Trying 22050 Hz MONO 16 bits :             ENTERING 
MustuxAudioBus.cc::supports



greetings
Reinhard